Volkswagen ID.4: Calibrating the Tire Pressure Monitoring System

The Tire Pressure Monitoring System must be recalibrated under the following conditions:

• If the tire pressures were adjusted.
• If one or more wheels were changed.
• If the wheels were rotated, for example from front to rear.

The Tire Pressure Monitoring System must only be recalibrated if all tires are inflated to the correct pressure when they are cold. In order to measure the tire pressure on cold tires, the vehicle must be left to stand for 3 hours or only be driven slowly over short distances during this time.

After being warned about a low tire pressure, switch the ignition off and back on. The Tire Pressure Monitoring System can only be recalibrated after this is done.

1. Switch the ignition on.

2. Switch the Infotainment system on.

3. Tap Vehicle in the Infotainment system.

4. Tap Vehicle (left-hand side).

5. Tap Tires.

6. Tap SET.

7. If all four tires meet the required tire pressure values, tap OK.

After travel times of at least 20 minutes and at different vehicle speeds, the system adapts to the new values and monitors them.

WARNING

If the Tire Pressure Monitoring System has been calibrated with a tire pressure that is too high or low, the Tire Pressure Monitoring System may give false warnings or fail to give a warning when the tire pressure is dangerously low.

• Ensure that the tire pressure is correct on all wheels before calibrating the Tire Pressure Monitoring System.

Limitations of the Tire Pressure Monitoring SystemTroubleshooting the Tire Pressure Monitoring System