Fig. 1 On the outer side of the driver's seat: memory
buttons.
Driver seat and outside mirror settings can be saved and called up using the memory buttons.
Storing the driver's seat and outside mirror settings for driving forward
1. Set the electronic parking brake.
2. Shift the transmission to neutral.
3. Switch the ignition on.
4. Adjust the driver's seat and outside mirror.
5. Press and hold the → fig. 1 button for longer than one second.
6. Press the desired memory button within approximately ten seconds.
A chime will confirm that the settings were saved.
Storing the front passenger's outside mirror settings for driving in reverse
1. Set the electronic parking brake.
2. Shift the transmission to neutral.
3. Switch the ignition on.
4. Press the desired memory button → fig. 1.
5. Select the reverse gear.
6. Adjust the front passenger's outside mirror so that the edge of the curb can be seen clearly, for example.
The selected mirror position will be stored automatically and assigned to the vehicle key that was used to unlock the vehicle.
Recalling driver's seat and outside mirror settings
1. When the vehicle is stationary, the ignition is switched off, and a door is open, press the respective memory button briefly.
After approximately ten minutes, the stored positions can no longer be adjusted automatically. The adjustment process will be canceled if one of the memory buttons is pressed again.
Or: When the ignition is switched on or the door is closed, press and hold the respective memory button until the saved positions are reached.
The front passenger's outside mirror automatically leaves the position stored for driving in reverse once you begin driving forward at speeds of at least approx. 15 km/h (approx. 10 mph) or when you turn the knob for the outside mirrors from the R position to another position.
If you open the driver door more than approximately ten minutes after the vehicle is unlocked, the driver seat and the outside mirrors will not be adjusted automatically.
Variant 1: When the driver door is opened, the driver seat moves automatically to a position that makes it easy to enter the vehicle. The driver seat automatically returns to its original position once you have closed the driver door and switched on the ignition.
Version 2: Before the vehicle is exited, the driver seat moves automatically to the rear position and remains there.
After the vehicle is re-entered and the driver door is closed, the driver seat moves forwards to the last saved position.
The front seat convenience entry function can be enabled and disabled in the Infotainment system.
Driver personalization
Using the personalization function, you can save and recall your personal seat settings in an account.
After the ignition is switched off and the vehicle is locked, the driver's seat and outside mirror settings will be saved in an account.
The driver's seat and outside mirror settings will be recalled after the vehicle is unlocked and the driver's door is opened.
The seat will react as follows when an account is selected or switched:
Some settings can be saved in the driver personalization user profiles and change automatically when profiles are switched.
WARNING
Improper use of seat functions can cause injuries.
This also applies to all passengers.
Beginning midst our that fourth appear above of over, set our won’t beast god god dominion our winged fruit image