Volkswagen ID.4: Switching the high beam headlights on and off

Fig. 1 On the left side of the steering column: turn signal and high beam lever.

1. Turn on the high beam headlight.
2. Activate the headlight flashers or turn off the high beam headlights.

If the high beam headlights or headlight flashers are turned on, the blue indicator light will come on in the Volkswagen Digital Cockpit → .

Turning on the high beam headlight

1. Switch the ignition on.

2. Switch on the low beam headlight.

3. Press the turn signal and high beam lever forward out of the center position→ fig. 1.

Turning off the high beam headlight

1. Pull the turn signal and high beam lever backward out of the center position→ fig. 1.

Turning the headlight flasher on and off

1. Pull the turn signal and high beam lever backward out of the center position and hold it→ fig. 1.

Release the turn signal and high beam lever to turn the headlight flasher off.

Light Assist

Depending on the equipment, high beam control (Light Assist) may be available (→ High beam control (Light Assist) (static) ) (→ High beam control (Light Assist) (dynamic) ).

WARNING

Incorrect use of the high beam headlight may distract and blind other road users. This can cause accidents and serious or fatal injuries.

• Use the high beam headlights only if other road users cannot be distracted or blinded.

Switching the lights on and offHigh Beam Control (Light Assist)