As soon as the system detects a speed limit on the route, a notification appears in the instrument cluster display. The detected speed is saved as the new desired speed.
To cancel speed adjustment
Or: release and press the accelerator pedal again twice.
The most recently saved speed is used again.
The current speed is assumed.
The system is switched to passive.
Adjusting the speed shown
+ 1 mph (1 km/h): Press the + button gently.
- 1 mph (1 km/h): Press the - button gently.
+ 5 mph (10 km/h): Press the + button firmly or swipe it from the bottom to the top. Pressing for the first time changes to the next-largest tens digit (km/h) or fives digit (mph).
- 5 mph (10 km/h): Press the - button firmly or swipe it from the top to the bottom. Pressing for the first time changes to the next-smallest tens digit (km/h) or fives digit (mph).
If you adjust the speed shown in the notification too far, the predictive speed control will be canceled.
If a speed limit is detected, the predictive control will adjust the saved speed, even if the speed limiter is not in control.
If the current speed is significantly higher than the speed limit detected by the Dynamic Road Sign Display, a warning will be shown in the instrument cluster display.
When joining a highway, the recommended speed will automatically be set as the desired speed.
Troubleshooting
A notification shows that the predictive speed limiter is currently unavailable or is not available in your country
1. If the message is displayed for a long time and the predictive speed limiter is available in your country, seek assistance from suitably qualified professionals. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.
Additional information may be displayed in the vehicle status, depending on the malfunction (→ Volkswagen Digital Cockpit (Pro) ).
Beginning midst our that fourth appear above of over, set our won’t beast god god dominion our winged fruit image